BaltechScript / ToggleInverted Protocol Frame
Set IoPort to low, wait Delay/10 seconds. Then set
IoPort to high and wait Delay/10 seconds again.
Repeat this RepeatCount times. This is exactly the
inverse behaviour of Toggle and
is mainly used to ensure that the IoPort is set to high
after finishing toggling.
See also Enable,
Disable or Toggle.
Format
|
Name
|
Type/Size
|
Description
|
|
InvertedToggledIoPort
|
Enumeration (8 bits)
|
I/O pins of the reader that can be controlled by
the user.
Values:
-
GreenLed (0x00)
Enable/disable/toggle the green LED (if
available).
-
RedLed (0x01)
Enable/disable/toggle the red LED (if
available).
-
Beeper (0x02)
Enable/disable/toggle the beeper (if
available).
-
Relay (0x03)
Enable/disable/toggle the relay (if
available).
-
Input0 (0x04)
Retrieve the state of the custom input
0.
-
Input1 (0x05)
Retrieve the state of the custom input
1.
-
BlueLed (0x06)
Enable/disable/toggle the blue LED (if
available).
-
TamperAlarm (0x07)
Retrieve the state of the tamper alarm.
-
Gpio0 (0x08)
Refers to a general purpose I/O. The
physical pin assigned to this logical
I/O port depends on the physical setup
of the device.
-
Gpio1 (0x09)
Refers to a general purpose I/O. The
physical pin assigned to this logical
I/O port depends on the physical setup
of the device.
-
Gpio2 (0x0A)
Refers to a general purpose I/O. The
physical pin assigned to this logical
I/O port depends on the physical setup
of the device.
-
Gpio3 (0x0B)
Refers to a general purpose I/O. The
physical pin assigned to this logical
I/O port depends on the physical setup
of the device.
-
Gpio4 (0x0C)
Refers to a general purpose I/O. The
physical pin assigned to this logical
I/O port depends on the physical setup
of the device.
-
Gpio5 (0x0D)
Refers to a general purpose I/O. The
physical pin assigned to this logical
I/O port depends on the physical setup
of the device.
-
Gpio6 (0x0E)
Refers to a general purpose I/O. The
physical pin assigned to this logical
I/O port depends on the physical setup
of the device.
-
Gpio7 (0x0F)
Refers to a general purpose I/O. The
physical pin assigned to this logical
I/O port depends on the physical setup
of the device.
-
CustomVled0 (0x40)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled1 (0x41)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled2 (0x42)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled3 (0x43)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled4 (0x44)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled5 (0x45)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled6 (0x46)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled7 (0x47)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled8 (0x48)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled9 (0x49)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled10 (0x4A)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled11 (0x4B)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled12 (0x4C)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled13 (0x4D)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled14 (0x4E)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
-
CustomVled15 (0x4F)
Custom Virtual LED (VLED) port.
Allows RGB LEDs to be activated
with a user-defined color.
|
|
RepeatCount
|
Integer (8 bits)
|
-
|
|
Delay
|
Integer (8 bits)
|
-
|
